Description
Nu-Vista 600.2
After the huge success of the acclaimed and multi award winning Nu-Vista 800.2, it is time to announce the new Nu-Vista 600.2.
Nu-Vista 600.2 is actually a much bigger update and rework than the Nu-Vista 800.2. Simon Quarry, the MF Chief of Design, has again done a fabulous job to fine tune the amplifier for sweet sound, but huge power and transparency.
Compared to the old Nu-Vista 600, this hugely-updated 600.2 now features the full TITAN power amp design including locally decoupled output stage.
PCB layout has been drastically reworked and improved. Electrical components have been updated, the 600.2 now uses the same laser trimmed volume control like the 800.2 and the PSU-section has been greatly improved.
The Nu-Vista 600.2 is Musical Fidelity’s latest love letter to strictly analog, discrete, dual mono amplifiers using big oversized toroidal transformers with multi array power supplies and the finest filtering of pre / power section.
And to top it all off, the beautiful Class-A tube stage consisting of highly famed, and by now almost extinct, nuvistor tubes. Plus the massive mechanics, stunning casework and display with VU-meters don’t only get you the best sound / performance but also the unmatched feel of true LUXURY.
MF believe that only a true analog amplifier with NO DIGITAL or even Wi-Fi streaming on board can reach the maximum of fidelity, which the concerned music lover is expecting of a Musical Fidelity product.
Nu-Vista 600.2 Integrated Amplifier, in Black finish, by Musical Fidelity.
Features
- A work of audio art using the incredible Nu-Vista circuitry
- NEW Redesigned front panel with new display
- NEW 2 x XLR inputs, 1 x XLR pre-output
- NEW Nu-Vista buffer stage – same as on 800.2 – taken from PRE/PAS/PAM
- NEW Power amp based on same circuitry design as in PAS/PAM
- NEW Power Amplifiers bulk supply capacitance and local output device decoupling now separated
- NEW 300 W / 4 ohms, 160 W / 8 ohms
- NEW Preamplifier circuits and inputs now fully dual mono
- NEW Laser trimmed volume control +/- 0.5dB gain error even at lower levels
- NEW Input switching IC changed for relays for better separation and dynamics
- NEW Dual mono power supplies improved for better performance
- NEW Bulk capacitance and rectifiers on separate PCB for reduced noise
- 2 x balanced XLR inputs
- 4 x RCA inputs
- 2 x RCA outputs (fixed & variable)
- 1 x balanced XLR output (variable)
- Colour display with optional VU-Meters and clear selected input and volume display
- Dimmable display
- Nu-Vista Remote Control – the front panel in your hand!
Specifications
- Power: 160 W into 8 Ohms, 300 W into 4 Ohms, 500 W peaks into 2 Ohms
- Voltage: 36 V RMS, 20 Hz – 20 kHz, onset of clipping, 147 V peak-to-peak
- Current: 50 Amps peak-to-peak
- Damping Factor: 100
- Output Devices: 2 x pairs per-channel
- Gain: Preamp 4.3 x (12.6 dB) at maximum volume, Power Amp 34 x (31 dB)
- Input THD+N: <0.005 % typical, 20 Hz – 20 kHz
- Input SNR: >107 dB A-weighted
- Input Impedance: 100 kOhms
- Frequency Response: + 0, –0.1 dB, 10 Hz – 30 kHz
- Line level Inputs: 4 pairs line level RCA connectors; 2 pairs line level balanced XLR connectors
- Line Level Outputs: 1 pair line level RCA connectors, constant level LINE outputs; 1 pair line level RCA connectors, PREAMP outputs for e.g. biamping; 1 pair line level XLR connectors, PREAMP outputs for e.g. bi-amping
- Speaker Outputs: 2 x pairs 4.0 mm banana plug / binding posts
- Mains Voltages: 115 / 230 VAC, 50 / 60 Hz (factory pre-set), 100 VAC, 50 / 60 Hz (alternative)
- Consumption: <0.5 W standby, 75 W on / idle, 600 W maximum
- Dimensions (W x H x D): 483 x 187 x 510 mm
- Weight: 36 kg net / 44.3 kg boxed
Included
- 1 x Nu-Vista 600.2
- 1 x Power Cord
- 1 x Documentation
Full Musical Fidelity Range Available
Unilet Sound & Vision are official retail partners for Musical Fidelity, providing sales, advice and assistance on their entire range of high-quality products. Please do get in touch if you would like a demonstration or wish to purchase.
