ProAc Response DT8 Loudspeakers

£2,825.00£3,635.00 inc. VAT

Trade-in available

The ProAc Response DT8 is the entry level floor-standing design in the Response product range, and the first time that ProAc have used two different types of drive unit in a two-way loudspeaker design.

ProAc believe that this innovative, fresh approach will create new interest in the mixing and matching of drive unit cone materials to effectively cover all types of music.

Response DT8 is amongst the winners in the What Hi-Fi? Awards 2021, following on from similar awards in 2020 too.


INTERESTED?  BOOK A DEMONSTRATION

SEEN IT FOR LESS?  LET US PRICE MATCH


* Usually ships within 1-3 business days. See exceptions


Brand:ProAc
 

Description

Response DT8

ProAc invests a great deal of time researching the choice of diaphragm material for their drive units, mainly because they feel this is a hugely important component, as it transfers cone movement into sound.

Certain drive unit materials excel at certain frequencies, and so it would be logical to use more than one type of material to cover all frequencies. Additionally, all production parts from the chassis through to the magnet system, spider and voice coil are painstakingly selected.

The ProAc Response DT8 incorporates these design parameters for the first time in a two-way design. Utilising 2 x 6.5 inch drivers with different cone materials, both working in tandem resulting in a well extended low frequency response and ProAc’s signature natural sounding midrange quality and pinpoint imagery.

These frequency ranges are then cleverly overlapped by a new, Stewart Tyler designed, crossover which seamlessly integrates ProAc’s proven 1 inch soft dome tweeter, offset on the front baffle, and placed between the two drivers.

Some other manufacturers frequently use the same drive unit cone material in each of the models in their range. ProAc has taken a different approach and has previously used carbon fibre, kevlar, pulp and polypropylene. However this is the first time they have used two different types of unit in a single two-way design.

Bass/Midrange Drivers

2x 6.5 inch drivers, one with a pulp mica cone unit delivering exceptional bass performance in a ported cabinet, with the bass loaded via side vents, and one polypropylene unit giving a smooth, detailed and uncoloured midrange

Tweeter

ProAc one-inch soft dome, as used in many other designs. This has a superbly flat response with electrostatic-type detail and surprising sweetness.

Specifications

  • Nominal Impedance: 4 Ohms.
  • Recommended Amplifiers: 20 to 180 Watts.
  • Frequency Response: 28Hz to 30kHz.
  • Sensitivity: 90dB linear for 1W at 1M.
  • Bass/Midrange Drivers: 2x 6.5" (165mm) bass/mid units. One with pulpmica cone and open weave dust cap, one with polypropylene cone with soft polypropylene dust cap. Both units working in tandem.
  • Tweeter: ProAc 1" (25mm) silk dome tweeter.
  • Crossover: Specially designed crossover to accommodate two different types of bass/mid cones. Glass fibre board with finest components using multistrand copper wire designed for use with both Biamping and Bi-wiring.
  • Grille: Acoustically transparent crimplene.
  • Mode: Floor-standing.

Finish

The ProAc Response DT8 is shown above in a standard Natural Oak finish. Please note that all natural wood finishes may vary in grain and shade.

However, ProAc do not currently supply images of their loudspeakers in ALL available finishes, so we have created these swatches to help illustrate the possibilities of their range.

DT8 loudspeakers are available in the following standard finishes:

ProAc Black Ash Wood Veneer | Unilet Sound & VisionProAc Mahogany Wood Veneer | Unilet Sound & VisionProAc Cherry Wood Veneer | Unilet Sound & VisionProAc Natural Oak Wood Veneer | Unilet Sound & VisionProAc Silk White Finish | Unilet Sound & VisionProAc Walnut Wood Veneer | Unilet Sound & Vision

At extra cost, the following premium finishes are also available:

ProAc Rosewood Veneer | Unilet Sound & VisionProAc Ebony Wood Veneer | Unilet Sound & Vision

Full ProAc Range Available

Unilet Sound & Vision are official retail partners for ProAc, providing sales, advice and assistance on their entire range of high-quality products. Please do get in touch if you would like a demonstration or wish to purchase.

More Information

Additional information

Weight 52 kg
Dimensions 22.9 × 19.3 × 97.8 cm
Colour

Black Ash, Cherry, Ebony, Mahogany, Natural Oak, Rosewood, Silk White, Walnut

Purchase Options

Home Delivery, Click & Collect, Trade-In Available

Brand

ProAc

Few companies have consistently produced high-quality products which have earned international acclaim, and ProAc is one such company. They do not make cheap loudspeakers and certainly do not produce cheap sounds, and many thousands of audiophiles worldwide happily agree with their philosophy.

Every ProAc loudspeaker is hand-crafted, their technicians individually responsible for the building and testing of each unit. Only the finest components are used, with each new model reflecting the very leading edge of audio technology. ProAc loudspeakers are only available through a network of enlightened dealers - of which Unilet Sound & Vision are one - and we are pleased to demonstrate the products and provide informed advice on partnering equipment.

ProAc | Unilet Sound & Vision

Reviews

There are no reviews yet.

Be the first to review “ProAc Response DT8 Loudspeakers”

Your email address will not be published. Required fields are marked *

You may also like…